I know the information is buried somewhere else, but .....
I am a long way from stepping a rig but am talking to my local sail maker about ordering sails - at least the fore and aft variety - over the winter to take advantage of 'boat show' pricing. I have my spars so I can specify E, I, J and P, but my sail maker will want to know about pre-bend for the mainsail. What amount of pre-bend have the experience users been setting? Chad, Jon, etc ....
Mast pre-bend
4 posts
• Page 1 of 1
Mast pre-bend
by Warren Nethercote » Thu Sep 28, 2017 9:29 pm
- Warren Nethercote
- Posts: 405
- Joined: Sat Apr 25, 2015 2:11 am
Re: Mast pre-bend
by Chad » Fri Sep 29, 2017 7:50 pm
Hi Warren,
Here's a shot of my main. I usually run 3-5" of prebend -probably closer to 3" in this pic on a very light day.
Here's a shot of my main. I usually run 3-5" of prebend -probably closer to 3" in this pic on a very light day.
You do not have the required permissions to view the files attached to this post.
- Chad
- Posts: 806
- Joined: Fri Mar 25, 2011 7:28 pm
- Location: N. E. MO
Re: Mast pre-bend
by Warren Nethercote » Sun Oct 01, 2017 2:46 am
FYI, on Facebook Jon said 3 to 5 inches and Dave Moran (PDX) said his North guy recommended 4 1/2 inches as a medium setting. Both have C-Tech spars, as does Chad.
- Warren Nethercote
- Posts: 405
- Joined: Sat Apr 25, 2015 2:11 am
Re: Mast pre-bend
by jray » Mon Oct 02, 2017 10:16 am
Have been running 5 to 6" pre-bend on the Twist
Jon
#061 Critical Twist
#061 Critical Twist
- jray
- Posts: 531
- Joined: Fri Mar 25, 2011 6:26 pm
- Location: Polson, Montana
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests