Materials List Anywhere?

Expertise and know-how available for all builders from Class Members

Moderators: admin, Kevin

Materials List Anywhere?

Postby Nic579 » Thu Oct 15, 2020 9:28 pm

I am looking at this for a project. Is there a Materials list anywhere?
Nic579
 
Posts: 2
Joined: Mon Oct 12, 2020 4:09 pm

Re: Materials List Anywhere?

Postby Marino » Thu Oct 15, 2020 9:48 pm

There is a list for the hardware on one of the forum pages. In regards to material list, I don't believe there is one. Try looking through the blogs. The builders describe what they used and Tim Ford shows a picture of all he used in the way of epoxy.
Some topics are asked more than once, so you may have to do a search or check each page.
Marino Zorz
Toronto, Ontario
Build License 307
Build log: http://photos.app.goo.gl/M2m7Afvf2f8p35nz5
Marino
 
Posts: 174
Joined: Fri Jun 10, 2011 2:23 am
Location: Toronto, Ontario, Canada

Re: Materials List Anywhere?

Postby Chad » Thu Oct 15, 2020 10:45 pm

This is the plywood nesting diagram I came up with for my build. These are 6mm okoume, except the left two sheets that are 5mm (foredeck, and aft-most deck). I didn't use ply for my cabin top. Some of my frame shapes (internally...) are also different than the official plan set.

Once you get the plywood and an initial order of epoxy and glass tape, the rest just gets bought and budgeted on an as-needed basis!

Screen Shot 2020-10-15 at 4.38.03 PM.pdf
You do not have the required permissions to view the files attached to this post.
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Materials List Anywhere?

Postby Nic579 » Fri Oct 16, 2020 12:46 am

Thanks

Chad that will work.

Marino, I did see a hardware list was looking for an idea of the needed ply.
Nic579
 
Posts: 2
Joined: Mon Oct 12, 2020 4:09 pm

Re: Materials List Anywhere?

Postby Warren Nethercote » Fri Oct 16, 2020 10:46 pm

The i550 plans also illustrate plywood nesting with about 20 sheets. Chad's layout is a bit more economical, but didn't use a plywood coach roof. I think I used 19 sheets, but had a lot of biggish leftovers.
Warren Nethercote
Boutilier's Pt, Nova Scotia
Build License 573
Build log: viewtopic.php?f=3&t=364
Warren Nethercote
 
Posts: 410
Joined: Sat Apr 25, 2015 2:11 am

Re: Materials List Anywhere?

Postby Watershed » Thu Nov 05, 2020 5:34 am

When I cut kits and patterns I use a set of OSB (flake board) templates. This lets me economize on waste by nesting as many parts as possible on the 4 x 8 ply sheets.
When all the hull panels, frames and miscellaneous parts are cut I've used 13 sheets with 7 uncut sheets for the kit. I buy it in 20 sheet lots because that is the first substantial price break.
Watershed
 
Posts: 35
Joined: Fri Jan 10, 2014 8:16 pm

Re: Materials List Anywhere?

Postby monsters inc » Sun Nov 08, 2020 10:28 am

I think I bought 14 sheets first. Then five more for decking.
monsters inc
 
Posts: 79
Joined: Tue Apr 10, 2012 12:08 am


Return to Building an i550

Who is online

Users browsing this forum: No registered users and 1 guest

cron