A very wet boat

Talk about it.

Moderators: admin, Kevin

A very wet boat

Postby Mist » Fri Oct 04, 2019 12:22 pm

Mist i550 #296 Tim K
Mist
 
Posts: 180
Joined: Fri Mar 25, 2011 9:41 pm
Location: Lower Chesapeake Bay, US

Re: A very wet boat

Postby Tim Ford » Sun Oct 06, 2019 5:35 pm

Interesting! Thanks for the heads-up, Tim.
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: A very wet boat

Postby monsters inc » Tue Oct 08, 2019 6:17 am

I guess I'm going to start collecting beach balls...
monsters inc
 
Posts: 79
Joined: Tue Apr 10, 2012 12:08 am

Re: A very wet boat

Postby Tim Ford » Tue Oct 08, 2019 1:41 pm

Yep. That and I will close up the companionway and hatch in sporty conditions.
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: A very wet boat

Postby monsters inc » Wed Oct 09, 2019 4:18 am

Is there a difference in buoyancy between woodys and glasses, or is it all about the air tanks. I suspect it is a minor difference...
monsters inc
 
Posts: 79
Joined: Tue Apr 10, 2012 12:08 am

Re: A very wet boat

Postby Warren Nethercote » Wed Oct 09, 2019 1:20 pm

Leon's Phatass had a knock down in South Africa. His keel wasn't locked down and the boat turned turtle, then flooded through the cabin. It ended up 'floating' on end just held up by an air bubble in the bow. It was reported on Leon's FB page.

All the glass, fairing compound, hardware and rig probably easily outweigh the buoyancy of plywood for an i550. Thus the buoyancy requirement in the class rules, which everyone (or nearly everyone) ignores. My own bot is unlikely to have airbags, but barring collisions it will be sailed with sealed under deck areas.
Warren Nethercote
Boutilier's Pt, Nova Scotia
Build License 573
Build log: viewtopic.php?f=3&t=364
Warren Nethercote
 
Posts: 409
Joined: Sat Apr 25, 2015 2:11 am

Re: A very wet boat

Postby Tim Ford » Wed Oct 09, 2019 1:31 pm

My "sealed" air tanks have become water ballast tanks, at least on the starboard side. Gotta get to the bottom of that, no pun intended.
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: A very wet boat

Postby Big_Dog » Mon Oct 14, 2019 12:44 am

As an option, the 48 liter Opti air bags have ~105 lbs of buoyancy. Last spring someone was selling these for 3 for $75.

https://www.amazon.com/s?k=optimist+air ... _sb_noss_1
Jon
#36 – Still In the Dawg House
Columbia, SC - Lake Murray
Big_Dog
 
Posts: 63
Joined: Wed Apr 13, 2011 4:04 am
Location: Columbia, SC - Lake Murray

Re: A very wet boat

Postby Warren Nethercote » Tue Oct 15, 2019 2:51 pm

Holt (formerly Holt Allen) in the UK have a broad range of buoyancy bags: see https://holt.eu/documents/holt-hull-and ... alogue.pdf

Who might stock them in theUS is another matter. West marine used to, but doesn't anymore it seems. White water canoing bags are also an option, See the Mountain Equipment Coop web site, for example. I would think that coated nylon bags would be preferable to vinyl. There must be a lot of exposed machine screw ends under any i550 deck, just itching to poke a hole in a buoyancy bag.
Warren Nethercote
Boutilier's Pt, Nova Scotia
Build License 573
Build log: viewtopic.php?f=3&t=364
Warren Nethercote
 
Posts: 409
Joined: Sat Apr 25, 2015 2:11 am

Re: A very wet boat

Postby Thomas » Wed Oct 16, 2019 10:23 pm

I used Pilates balls from Walmart about $8 a piece ,very strong they come with pump stuff them all over the place and inflate part way .
Thomas
 
Posts: 51
Joined: Fri Feb 23, 2018 12:27 am

Re: A very wet boat

Postby Warren Nethercote » Wed Oct 16, 2019 10:56 pm

Nice option Thomas. The big ones have about 50 lbs of buoyancy, and at less than 10 bucks a ball it's likely to be waaay cheaper than pukka flotation bags. The thick-walled balls are likely to be more abrasion resistant too.
Warren Nethercote
Boutilier's Pt, Nova Scotia
Build License 573
Build log: viewtopic.php?f=3&t=364
Warren Nethercote
 
Posts: 409
Joined: Sat Apr 25, 2015 2:11 am

Re: A very wet boat

Postby monsters inc » Thu Oct 17, 2019 5:30 am

Thanks Thomas, great idea!
monsters inc
 
Posts: 79
Joined: Tue Apr 10, 2012 12:08 am


Return to General i550 Chatter

Who is online

Users browsing this forum: No registered users and 6 guests

cron