Deck Layout

Expertise and know-how available for all builders from Class Members

Moderators: admin, Kevin

Deck Layout

Postby r2heisch » Sat Jun 20, 2020 7:17 pm

I have been idle for about a year now on my build, primarily because I am afraid to deck the back half and lose access. I need to deck the boat, HOWEVER I am not a seasoned sailor and much of the hardware is still a bit foreign to me. I have come to the point that I need to finish and hope to splash by this time next summer.

Does anybody have a tried and true deck layout featuring a bridle system that I could steal? If I could get even a rough sketch with approximate locations for everything (short cabin version) I think that I could get going again. THANKS!
r2heisch
 
Posts: 16
Joined: Sat Feb 11, 2017 7:11 pm

Re: Deck Layout

Postby Warren Nethercote » Sat Jun 20, 2020 7:44 pm

Look at Chad's build blog. He offers good layouts, albeit complex. But the basic stuff is all the same.
Warren Nethercote
Boutilier's Pt, Nova Scotia
Build License 573
Build log: viewtopic.php?f=3&t=364
Warren Nethercote
 
Posts: 410
Joined: Sat Apr 25, 2015 2:11 am

Re: Deck Layout

Postby Marino » Sun Jun 21, 2020 1:22 am

Where three photos of how some bridle systems and deck layout. Shazza(?) Has a over head picture showing his seating and layout. Will try to locate it and post it if possible.
You do not have the required permissions to view the files attached to this post.
Marino Zorz
Toronto, Ontario
Build License 307
Build log: http://photos.app.goo.gl/M2m7Afvf2f8p35nz5
Marino
 
Posts: 174
Joined: Fri Jun 10, 2011 2:23 am
Location: Toronto, Ontario, Canada

Re: Deck Layout

Postby Chad » Sun Jun 21, 2020 3:04 am

I did this simple layout for the guy that was building fiberglass boats. He had a rep for Ronstan he liked, so most hardware is that brand, with some Harken parts too.

i550_DECK.pdf
You do not have the required permissions to view the files attached to this post.
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Deck Layout

Postby Marino » Mon Jun 22, 2020 2:29 am

Found this in Shazza's blog
You do not have the required permissions to view the files attached to this post.
Marino Zorz
Toronto, Ontario
Build License 307
Build log: http://photos.app.goo.gl/M2m7Afvf2f8p35nz5
Marino
 
Posts: 174
Joined: Fri Jun 10, 2011 2:23 am
Location: Toronto, Ontario, Canada

Re: Deck Layout

Postby admin » Mon Jun 22, 2020 2:19 pm

I just used the Harken diagram for the Melges 20.
https://www.harken.com/uploadedImages/T ... s20-LG.jpg
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: Deck Layout

Postby r2heisch » Tue Jun 23, 2020 2:35 pm

Excellent. Thanks
r2heisch
 
Posts: 16
Joined: Sat Feb 11, 2017 7:11 pm


Return to Building an i550

Who is online

Users browsing this forum: No registered users and 13 guests

cron