Some i550 Videos

[Warren Nethercote]

I have often wanted thought it might be nice to have a collection of i550 video links, rather than searching every time, so I went looking. I did not include many videos of boats being turned over, or bulbs being poured. There are more to be had, but I pass the torch. (Edit 8 Nov; added Tasmanian Flip) (Edit 11 Nov, added Keel Profile Router Jig) (Edit 1 Jan 2016; added Festool scarfing jig) (Edit 21 Apr 2016, #424 sailing in 30 Kts)(Edit 23 Dec 2016; Sailing Hot Canary, Man Overboard) (Edit 2 may 2017; Tonka with new owner)(Edit 4 April 2018, Chad's rigging and flip)(Edit 22 Aug 2019 Russian Spinnaker Reach)(14 Oct 2019, Ay Chihuaua hul build time lapse courtesy Big Dog)

Tokyo Trash Baby’s introductory video: https://www.youtube.com/watch?v=nsVSMCQaSjU
Tokyo Trash baby: https://www.youtube.com/watch?v=k_FKI10sb4A
Tokyo Trash baby two-sail reach: https://www.youtube.com/watch?v=oKIuf13w10c
Trash baby Crate Cup: https://www.youtube.com/watch?v=JUiOw1wd06I
TTB again: https://www.youtube.com/watch?v=UlLGFP8Tenk
TTB Surf to City 2011: https://www.youtube.com/watch?v=p-DIOo5MhZQ

Croatian i550: https://www.youtube.com/watch?v=rSeHGX5C-nk
#424 sailing in light air, upwind & down: https://www.youtube.com/watch?v=vnXsSh44Bzg
#424 ins 30 kts, upwind and down https://www.youtube.com/watch?v=QRyE3cf51OE
Light Air Leeward Mark Rounding: https://www.youtube.com/watch?v=bXlIb5gI94k

2015 Delta Ditch Run on Poker Face: https://www.youtube.com/watch?v=DsEVD4Q1v7s

Shazza Spin Reaching: https://www.youtube.com/watch?v=pCE4CGUkgq0
Shazza: https://www.youtube.com/watch?v=i_outXhRIQ0
Shazza Again: https://www.youtube.com/watch?v=Vp2ZZdpURnY

Russian Spinnaker reach: https://www.facebook.com/mrsamsaruelle/ ... 153092781/

i550 Broken Rudder: https://www.youtube.com/watch?v=NTgNEakOFvg

Tonka sailing close-hauled: https://www.youtube.com/watch?v=-IuxBKmTRyE

Tonka under new ownership: https://www.youtube.com/watch?v=637cCpemZ7U

2010 i550 Nats (3 boats in light air): https://www.youtube.com/watch?v=mbde6qPg2_8

Critical Twist: https://www.youtube.com/watch?v=TAgC94dMqmM

Gougeon Time-lapse buuid: https://www.youtube.com/watch?v=GDs_BKdYjaQ
Rowing Hot Canary: https://www.youtube.com/watch?v=S1lTpKFo0cA
Hot Canary Sailing: https://www.youtube.com/watch?v=bDSk-RizrPg
Sailing Hot Canary (man overboard): https://www.youtube.com/watch?v=eBxD-gjzM8c

Ay Chihuahua hull build time lapse, https://www.instazu.com/media/1914152279961071103

Pipe Dream Flip during build: https://www.youtube.com/watch?v=7IIZmlnjdDk
Tasmanian Flip: https://www.youtube.com/watch?v=JrR3mPXHS5s

Chad's rigging and flip https://www.youtube.com/watch?v=Oe0FgLc ... e=youtu.be

Keel Profile Routing Tool: https://www.youtube.com/watch?v=ynxUcnRjWug

Festool based scarfer: https://vimeo.com/37895374

PDX #4 Build video: https://www.youtube.com/watch?v=nPVWfHWCTew
First PDX launch & sail: https://www.youtube.com/watch?v=RhcQsI959BY
PDX Sailing on Detroit lake: https://www.youtube.com/watch?v=SCjKfEtSn_U

[Marino]

Nice job Warren, there is one more that was overlooked on youtube. The i550 flip in Tasmania. Not sure how to display link.

[Warren Nethercote]

Marino, I have edited my original post to add the Tasmanian flip ..... (It is straightforward to capture the link, play the video and copy the URL that is displayed during the video, and then paste it wherever you want. I made a WORD doc first and then copied the whole thing into the forum. Extracting embedded videos from Facebook is another mystery entirely!)

[Marino]

Thanks Warren for the advice. What stage of built are you? Any pictures?

[Warren Nethercote]

Mostly thinking. I have a bulb pattern at a boatbuilder for casting and my mast, boom and sprit are ordered. I am doing some of the expensive stuff up front to avoid later paralysis. My hull build won't start until next winter. My build log (what little there is of it) is in the forum. viewtopic.php?f=3&t=364

[jray]

How are things going with the build? Hopefully well. I bought a lot of stuff when I found it at a discount even if I didn't need it at the time for the build. I would like to see pics of your progress.

[Warren Nethercote]

Not much visible progress. As I said in my build log, autumn was my get-ready-for-iceboating season and in the first week of December I drove to Lake Christina, MN for the first DN regatta of the year, aptly named the Great Western Challenge. It was a long trip (Fargo ND was 60 miles further) but the sailing was good. Third in silver fleet, but more satisfying were two top tens in the combined gold/silver scrub racing fleet. (KC 3786 is me in the picture: iceboats are not ISAF/World sailing affiliated, so we never made the conversion to the television oriented three-letter country codes for sail numbers)

No build progress photos because any progress is remote at the moment. I had a call from the foundryman a couple of weeks ago: he was getting to my bulb and had a couple of questions, like "Did you include a shrinkage allowance in your pattern?" I said "No, but it won't matter in this application ...." So I should see a bulb one of these days - probably later rather than sooner. On the rig side we have selected prod and boom designs from available tooling and mast tooling is under construction at Fast Composites (aka Phil's Foils). The plan is for February delivery of mast, boom and prod so I can pick them up in Ottawa while returning from the DN North American championships. With the Canadian dollar sliding I am happy to have chosen a Canadian source.

I have some iceboat-related composite stuff to do (a new CF tiller) and will likely use that as an opportunity to start working on the i550 foils.

[jray]

Good to hear the pieces are coming together. I worked with fast composites, they did both my rudder/cassette and strut. Great guys and quality work.

Love the ice boat stuff, always wanted to try it. In the past I've thought about building a experimental one using sunfish rigging just to run around some of our smaller lakes that freeze over well. Thanks for the DN pic, got me thinking about it again.

[Warren Nethercote]

If you are contemplating a Sunfish-based iceboat have a look at plans for 'Cheapskate' on the Chickawaulkie Ice Boat Club website: http://iceboat.me/cheapskate/ I have seen Cheapskate in the flesh and it is both easy and quick to build and a remarkably effective recreational iceboat. If racing is not your bag on the ice then there is no need to go the expensive route. DN's are now rather high-tech, with 2 to 3 thousand dollar composite masts and $600 (each!) runners. Cheapskate is anything but that! And cheapskate is small enough to be no embarrassment when it needs to be stored in warm (or snowy) weather.

[jray]

Thanks Warren! Nice to follow what someone else has done and not try to reinvent it. I didn't know this was available. Very likely my next project.

[Chad]

Our local lake thoroughly froze last year for the first time since I've been here, causing me to go looking for ice boat ideas. I thought about a strap-on set of runners for the El Toro, and I looked at the cheapskate plans, but ended up having no time for either.

50's forecast for Christmas, it's going to be a warm or late winter here.

[Warren Nethercote]

Bump: moving the videos in the first entry to this string up the forum again.

[Warren Nethercote]

Bump: new video added to the first post in this string.

[Tim Ford]

Thanks, this is an outstanding compilation!

[Big_Dog]

one video ad a few pics of a build. Location Seattle, Washington
https://www.instazu.com/media/1867707490339417977
https://www.instazu.com/media/1867795202899900949
https://www.instazu.com/media/1867795202899900949
https://www.instazu.com/media/1867980136096538986
https://www.instazu.com/media/1868422742410089182
https://www.instazu.com/media/1868427166947773997
video
https://www.instazu.com/media/1914152279961071103