Getting it done...

Expertise and know-how available for all builders from Class Members

Moderators: admin, Kevin

Getting it done...

Postby Chad » Sat Nov 19, 2011 1:39 pm

Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Getting it done...

Postby Mist » Sat Nov 19, 2011 2:39 pm

Chad, Thanks for the help posting the get-up I used. I only had to stop once in the 25 mile trip to replace a screw. I wouldn't use this arrangment again, unless I really had too.
Mist i550 #296 Tim K
Mist
 
Posts: 180
Joined: Fri Mar 25, 2011 9:41 pm
Location: Lower Chesapeake Bay, US

Re: Getting it done...

Postby Mist » Sat Nov 19, 2011 2:43 pm

By the way, I like the lever on your comp-post. Though, at first look, I thought it was opening beer and wine bottles.
Mist i550 #296 Tim K
Mist
 
Posts: 180
Joined: Fri Mar 25, 2011 9:41 pm
Location: Lower Chesapeake Bay, US

Re: Getting it done...

Postby Chad » Sat Nov 19, 2011 3:22 pm

I know that rig isn't the "normal" way to carry a mast, which is why I like that you got it to work.

When I delivered Brandt's mast (in three pieces) on the roof of my little Mazda, I used about a roll of duct tape and 75' of rope. Rock solid at 80mph with passing trucks and crosswinds.

I don't usually do bottles on boats, except maybe at the dock. Have always used the end of a winch handle in the past- not a likely option on this boat!
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Getting it done...

Postby Mist » Sat Nov 19, 2011 3:46 pm

My top speed was 45 mph and I was nervous. I'm completely unfamiliar with an adjustable jack stay. I'm curious how it will work out and it looks interesting.
Mist i550 #296 Tim K
Mist
 
Posts: 180
Joined: Fri Mar 25, 2011 9:41 pm
Location: Lower Chesapeake Bay, US

Re: Getting it done...

Postby Chad » Sun Nov 20, 2011 1:30 am

The lever is just a quick and easy way to tension and ease the cap (masthead) shrouds, which are sorta like diamonds on my rig with the bottom leg returning to the mast at the step. I've found that stuff that is difficult to adjust, often doesn't get adjusted. I hate busting out the wrenches to change rig tune, so this is my way of avoiding that, is all. And I can change it upwind and down, if it seems warranted...
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Getting it done...

Postby Mist » Sun Nov 20, 2011 9:19 pm

Chad,

I think I'm old school or haven't kept up with the times. I never imagined adjustable standing rigging. I need to contemplate that.
Mist i550 #296 Tim K
Mist
 
Posts: 180
Joined: Fri Mar 25, 2011 9:41 pm
Location: Lower Chesapeake Bay, US

Re: Getting it done...

Postby Chad » Mon Nov 21, 2011 11:21 pm

Mebbe it's only "standing rigging" if it's not adjustable ;) The M20 that you got your mast from had a ramp-based adjustable shroud setup as I recall. Mine is just one of the other simple machines...
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Getting it done...

Postby Mist » Tue Nov 22, 2011 1:15 am

Yes, you're correct. The M20 rig does have the adjustment. Though, I never considered using it before I understood what you are upto. Chances are I won't start out with it. I'm trying to keep this boat simple, if that's possible. It will keep me from raising my voice at the children when things get exciting.
Mist i550 #296 Tim K
Mist
 
Posts: 180
Joined: Fri Mar 25, 2011 9:41 pm
Location: Lower Chesapeake Bay, US


Return to Building an i550

Who is online

Users browsing this forum: No registered users and 18 guests

cron