AGM Rule 5.3.7 Discussion (P length)

Talk about it.

Moderators: admin, Kevin

AGM Rule 5.3.7 Discussion (P length)

Postby Chad » Fri Dec 06, 2013 10:37 pm

This is the other of the "anti-pdx" rules that was made at the time of the split. I'd like (not just for selfish reasons) to see the old/original limit put back in place.

italicized = removed
bold = new

5.3.7 The upper edge of the boom at the mast shall be no more than 285" (7239mm) 294” (7468mm) below the lower edge of Band 1.


Note the original rule was 295" from the top of the mast, pdx is currently 295" from the top of sheave, and this 294" is from a band denoting the top of the luff of the sail at least an inch below the masthead. I think that makes this proposed 294 functionally equivalent. Can anyone show that a sail can be hoisted to within an inch of the top of sheave?
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: AGM Rule 5.3.7 Discussion (P length)

Postby jray » Fri Dec 06, 2013 10:43 pm

Another plus to using the band 1 for measuring it allows someone to repurpose a existing stick even if it is a bit longer.
Jon
#061 Critical Twist
jray
 
Posts: 531
Joined: Fri Mar 25, 2011 6:26 pm
Location: Polson, Montana

Re: AGM Rule 5.3.7 Discussion (P length)

Postby jray » Sat Dec 07, 2013 2:23 am

Second
Jon
#061 Critical Twist
jray
 
Posts: 531
Joined: Fri Mar 25, 2011 6:26 pm
Location: Polson, Montana

Re: AGM Rule 5.3.7 Discussion (P length)

Postby slowpoke » Fri Dec 27, 2013 12:39 am

Or maybe even the ability to use a longer stick with different sails for phrf racing in light wind areas? I've always preferred using the bands, as there are a lot of sticks out there that can be had for cheap that are not exactly made for the i550.
Rocky Shelton
Slowpoke, #288
Tijuana, Mexico
slowpoke
 
Posts: 365
Joined: Fri Mar 25, 2011 8:36 pm
Location: Tijuana, Mexico

Re: AGM Rule 5.3.7 Discussion (P length)

Postby jray » Fri Dec 27, 2013 2:02 am

A great reason to set the sail dimensions to bands or points vs total mast height.
Jon
#061 Critical Twist
jray
 
Posts: 531
Joined: Fri Mar 25, 2011 6:26 pm
Location: Polson, Montana

Re: AGM Rule 5.3.7 Discussion (P length)

Postby micah202 » Fri Dec 27, 2013 3:15 am

...I've always liked the idea of a +/- ~1' on the mast,,with the opposite for the boom...

...ie,,,if you found a good deal on a shortish mast,,,you can carry a longer boom..or visa-versa within limits.
...it'd add flexibility to the cobbled-boat folks ;) ,,,not to mention that's how I got 'Carbon Offset' :?

...another resourceful factor would be that used melges 20 sails would be a quicker-fit
i550 #240 ''carbon offset'',vancouver,BC,Canadah
......please be surre to user a resperarator ,espectially doing largger areasa of epoxy.
.....utherrwise,yerulll endap takling uhnd rithing rike ah do--NAHT GUD,ehnytime
micah202
 
Posts: 390
Joined: Tue Jul 26, 2011 2:34 am
Location: vancouver BC

Re: AGM Rule 5.3.7 Discussion (P length)

Postby Chad » Fri Dec 27, 2013 3:20 pm

A foot? That seems pretty big to me, and could set up a horses for courses problem, where low-aspect rigs dominate the windy venues, and vice versa.

I'd be alright with 6" of shortened mast traded for 6" of extra boom (but not the other way, no added mast height with shortened boom).

The Constitution clause that is currently proposed could also address this issue. I don't know if making a rule that could have the effect of encouraging folks to try alternate rigs is worth the flexibility it gives to "cobblers", if that flexibility is already (mostly) going to be provided?
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: AGM Rule 5.3.7 Discussion (P length)

Postby micah202 » Sat Dec 28, 2013 4:06 am

Chad wrote: .;.........................The Constitution clause that is currently proposed could also address this issue. I don't know if making a rule that could have the effect of encouraging folks to try alternate rigs is worth the flexibility it gives to "cobblers", if that flexibility is already (mostly) going to be provided?.



...good point(s) ;)
i550 #240 ''carbon offset'',vancouver,BC,Canadah
......please be surre to user a resperarator ,espectially doing largger areasa of epoxy.
.....utherrwise,yerulll endap takling uhnd rithing rike ah do--NAHT GUD,ehnytime
micah202
 
Posts: 390
Joined: Tue Jul 26, 2011 2:34 am
Location: vancouver BC

Re: AGM Rule 5.3.7 Discussion (P length)

Postby noemar » Sat Dec 28, 2013 3:58 pm

I like the idea of using Melges 20 sails as I now have a source for lightly used M20 sails at great prices. Due to not having any other i550s within reasonable distance I am going to rig hull 355 with the M20 sails and adapt my Viper rig to fit.
Noel
noemar
 
Posts: 140
Joined: Sun Apr 17, 2011 12:42 am
Location: New Bedfod,MA Buzzards Bay

Re: AGM Rule 5.3.7 Discussion (P length)

Postby micah202 » Sat Dec 28, 2013 6:45 pm

noemar wrote:I like the idea of using Melges 20 sails as I now have a source for lightly used M20 sails at great prices. Due to not having any other i550s within reasonable distance I am going to rig hull 355 with the M20 sails and adapt my Viper rig to fit.
Noel

...yer got an extra chute or Jib?
i550 #240 ''carbon offset'',vancouver,BC,Canadah
......please be surre to user a resperarator ,espectially doing largger areasa of epoxy.
.....utherrwise,yerulll endap takling uhnd rithing rike ah do--NAHT GUD,ehnytime
micah202
 
Posts: 390
Joined: Tue Jul 26, 2011 2:34 am
Location: vancouver BC

Re: AGM Rule 5.3.7 Discussion (P length)

Postby noemar » Sat Dec 28, 2013 8:34 pm

I have a main and Dacron jib by Doyle for a viper that I can sell. Also a lightly used. North Mylar jib (Melges20))that I might let go for a reasonable offer.
Noel
noemar
 
Posts: 140
Joined: Sun Apr 17, 2011 12:42 am
Location: New Bedfod,MA Buzzards Bay


Return to General i550 Chatter

Who is online

Users browsing this forum: No registered users and 14 guests