build status

Expertise and know-how available for all builders from Class Members

Moderators: admin, Kevin

Re: build status

Postby lohwaikin » Sat Nov 01, 2014 1:12 pm

Glad to announce that hull #437 from Singapore has splashed....

2014-10-31-4 (Forum).jpg


2014-10-31-6 (Forum).jpg


2014-10-31-7 (Forum).jpg


2014-10-31-10 (Forum).jpg


2014-10-31-19 (Forum).jpg
You do not have the required permissions to view the files attached to this post.
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby lohwaikin » Sat Nov 01, 2014 1:27 pm

The slight list to starboard is contributed by the 13kg Suzuki DF2.5 outboard.
Right after the boat floated off the trailer and started to motor towards the jetty, the roll of the boat was quite appreciable.
Something like a slow -15/15 degree port to starboard.
After the keel was lowered, the boat was dead stable.
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby Tim Ford » Sat Nov 01, 2014 1:40 pm

Outstanding, Loh! Congratulations!
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: build status

Postby lohwaikin » Sat Nov 01, 2014 2:07 pm

Went for the first sail today, or should I say motoring.
I wanted to try sailing with jib alone, but there's still some work to be done on the jib sheeting.
And the kids wanted to tack along, plus the time was 4pm.
So I herded them onto the cockpit, and motored off.
We didn't travel far, maybe from one end of the marina's mooring zone to the other, about 800 meters across.
Then returned to our designated buoy-mooring, secured up and took the ferry service back to shore.

2014-11-1-4 (Forum).jpg


2014-11-1-8 (Forum).jpg


Findings today:
1) The rudder is very responsive: I have a full section 4-feet rudder, no tapering.
2) The Suzuki DF2.5 outboard impressed me. I kept it for 10 months, started it once in a water-bin on inspection day. And it started on the second pull.
The outboard did stalled out several times when I opened the throttle too fast, but it restarted without fuss, and the throttle response seems to "heal" as we motored on.
I believe it was just a case of "sticky carburettor".

Weather permitting, I will try to hoist the jib tomorrow (02 NOV).
The main-sail is completed with insignias and markings, less reef lines.
I will find a weekday afternoon to hoist the mainsail, maybe alone or with a mate.

2014-10-26-14 (Forum).jpg


Cheers,
You do not have the required permissions to view the files attached to this post.
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby Tim Ford » Sat Nov 01, 2014 4:55 pm

NIcely done! Cute kids, too!! I envy you the floating boat and the warm weather. Today is the Mid-Atlantic Championship for the J35s and the Chesapeake Championship for the J105s....it's 48 degrees F and blowing 30 - 33 kn on the race course... I can easily say, "glad I am not sailing today!"

Best of luck on your maiden sail, Loh.
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: build status

Postby ryderp » Sat Nov 01, 2014 5:13 pm

The boat and the kids look great! Good luck with your inaugural sail.

Phil
ryderp
 
Posts: 259
Joined: Thu Apr 28, 2011 3:54 pm

Re: build status

Postby i550sailor@aol.com » Sat Nov 01, 2014 6:52 pm

lohwaikin wrote:Went for the first sail today, or should I say motoring.
I wanted to try sailing with jib alone, but there's still some work to be done on the jib sheeting.
And the kids wanted to tack along, plus the time was 4pm.
So I herded them onto the cockpit, and motored off.
We didn't travel far, maybe from one end of the marina's mooring zone to the other, about 800 meters across.
Then returned to our designated buoy-mooring, secured up and took the ferry service back to shore.

2014-11-1-4 (Forum).jpg


2014-11-1-8 (Forum).jpg


Findings today:
1) The rudder is very responsive: I have a full section 4-feet rudder, no tapering.
2) The Suzuki DF2.5 outboard impressed me. I kept it for 10 months, started it once in a water-bin on inspection day. And it started on the second pull.
The outboard did stalled out several times when I opened the throttle too fast, but it restarted without fuss, and the throttle response seems to "heal" as we motored on.
I believe it was just a case of "sticky carburettor".

Weather permitting, I will try to hoist the jib tomorrow (02 NOV).
The main-sail is completed with insignias and markings, less reef lines.
I will find a weekday afternoon to hoist the mainsail, maybe alone or with a mate.

2014-10-26-14 (Forum).jpg


Cheers,


Loh,

Your boat looks very nicely done. It has to be a great feeling of accomplishment to have her splashed.
Is you rudder the plan set rudder?, if so let me know how you like it. I have mine built but not sure I should have done more research.
i550sailor@aol.com
 
Posts: 132
Joined: Mon Jul 15, 2013 5:40 am

Re: build status

Postby Marino » Sat Nov 01, 2014 7:09 pm

Congraulations, may you and your children have a GREAT times sailing your sailboat.
Marino Zorz
Toronto, Ontario
Build License 307
Build log: http://photos.app.goo.gl/M2m7Afvf2f8p35nz5
Marino
 
Posts: 174
Joined: Fri Jun 10, 2011 2:23 am
Location: Toronto, Ontario, Canada

Re: build status

Postby slowpoke » Mon Nov 03, 2014 3:56 am

Great job Loh! Your successful launch really motivates me!
Rocky Shelton
Slowpoke, #288
Tijuana, Mexico
slowpoke
 
Posts: 365
Joined: Fri Mar 25, 2011 8:36 pm
Location: Tijuana, Mexico

Re: build status

Postby lohwaikin » Tue Nov 11, 2014 4:59 am

Spent 2 hours on the water last Saturday with kids, the jib alone. Very little wind as this is the time between monsoon switching.
Almost impossible to do a reach under jib alone. Once the jib filled up the boat turned downwind on its own, and rudder seemed useless without speed.
I noticed nobody in the bay was on jib-sail alone, except us...
Motored off about 2 tanks of gasoline running all over the 2-km wide harbour entrance searching for the elusive "puffs".
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby lohwaikin » Tue Nov 11, 2014 5:01 am

On Sunday I went out alone with main-sail and finally found some wind....
You do not have the required permissions to view the files attached to this post.
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby lohwaikin » Tue Nov 11, 2014 5:07 am

Notice the leech wasn't quite smooth up till the 5th panel (where the i550 logo is).
That is the consequence of lofting and cuting sail panels at 2am in the morning, on the living room floor big enough for only one panel at a time!

Cheers,
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby jray » Tue Nov 11, 2014 11:50 am

I knew you built your own mast but had no idea you made the sails also. Well done!

Good to hear you got her out for a sail. :D
Jon
#061 Critical Twist
jray
 
Posts: 531
Joined: Fri Mar 25, 2011 6:26 pm
Location: Polson, Montana

Re: build status

Postby lohwaikin » Tue Dec 16, 2014 10:33 am

This photo was taken just before the northeast monsoon sets in (29 Nov).
Very light northeasterly, making about 5 kph (using a land Garmin GPS) with both sails lightly tensioned.
The 2:1 jib sheeting was a bit overkill for such condition.

2014-11-29-13 (Forum).jpg


Been out sailing last weekend. 15 knots northeast wind (occasional wave caps). No time to pick up the camera nor turn on the GPS.
Very good reaching speed (more than 5 kph) with jib alone.
Got ambitious and raised the main.
Almost flipped over (kids holding onto hiking straps for dear life!).
Returned alone on Sunday to sail with just the jib.
Re-rigged the jib sheeting to 1:1.
Really regretted doing so; I hardly can sheet in with one arm once the jib filled up.
Still trying to tack single-handedly without losing speed.
On one such tack I attempted to round a buoy, lost speed going in, and when the jib caught wind again with the rudder ineffective, the boat spun with the extended prod (my temporary windex mounting) slamming into the buoy.
Not much damage, just that the prod (63x1.5mm alum tubing) became too bent to be retracted.

The northeast monsoon is going to last till March next year.
So I'm putting away my punch-list of repairs and finish-up tasks to stay on the water as much as possible.

Cheers,
You do not have the required permissions to view the files attached to this post.
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby admin » Tue Dec 16, 2014 11:12 pm

Great report, thanks Loh! Sorry about the prod and glad the kids are OK ;-)

What are the water temperatures like in your location this time of year?

--TF
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: build status

Postby lohwaikin » Wed Dec 17, 2014 12:25 am

25C (77F) almost all year round, warm and nice (if you discount the occassional brackish coastal water).
The down side of warm water is rapid fouling build-up on the bottom just 3 days moored on the water.
I will try the mainsail again this weekend with 1/4 of sail area reefed down.

Cheers,
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby Mist » Wed Dec 17, 2014 12:52 am

That is a really cool photo with the child on the deck!
Mist i550 #296 Tim K
Mist
 
Posts: 180
Joined: Fri Mar 25, 2011 9:41 pm
Location: Lower Chesapeake Bay, US

Re: build status

Postby lohwaikin » Wed Dec 17, 2014 3:23 am

This is the image I had in my mind from the moment I started drawing bulkhead patterns on plywood (April 2012).
I thought I can build an 800-lb boat in 9 to 12 months, but ended up spending 2 years 6 months.
This is the image that kept me going on those lonely nights in the workshop away from cosy bed and TV of home.
Many times I felt the urge to quit, but this image reminds me my dreams are my own and nobody owes me one.

Now I can understand why we build our own boats.
We feel the need to overcome ourselves.

2014-12-06-3 (Forum).jpg


Cheers,
You do not have the required permissions to view the files attached to this post.
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby i550sailor@aol.com » Wed Dec 17, 2014 3:40 am

lohwaikin wrote:This is the image I had in my mind from the moment I started drawing bulkhead patterns on plywood (April 2012).
I thought I can build an 800-lb boat in 9 to 12 months, but ended up spending 2 years 6 months.
This is the image that kept me going on those lonely nights in the workshop away from cosy bed and TV of home.
Many times I felt the urge to quit, but this image reminds me my dreams are my own and nobody owes me one.

Now I can understand why we build our own boats.
We feel the need to overcome ourselves.

2014-12-06-3 (Forum).jpg


Cheers,


Very well said Loh, and man do I hear you. The boat looks great.
i550sailor@aol.com
 
Posts: 132
Joined: Mon Jul 15, 2013 5:40 am

Re: build status

Postby admin » Wed Dec 17, 2014 4:00 pm

"Now I can understand why we build our own boats.
We feel the need to overcome ourselves."

A candidate for the "official slogan of the i550 builder-class?"

Great job, Loh!
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: build status

Postby Mist » Thu Jan 01, 2015 6:13 pm

HAPPY NEW YEAR EVERYONE!

I'm making progress with painting the hull sides. These photos show the color selection. I'm not completely happy with the finish texture so I'll be wet-sanding the entire boat and applying another coat. Hopefully just one more coat (possibly two, if I sand through).

I used Interlux Profection, Lauderdale Blue. I'm was extremely happy with the way this paint acted on the first coat using Russell Brown's roller only method. I had absolutely lap-mark free finish, though I did have a fair amount of dust in it. I don't know why the second coat applied six hours, the minimum re-coat time, had extreme orange peeled in it.
You do not have the required permissions to view the files attached to this post.
Mist i550 #296 Tim K
Mist
 
Posts: 180
Joined: Fri Mar 25, 2011 9:41 pm
Location: Lower Chesapeake Bay, US

Re: build status

Postby admin » Fri Jan 02, 2015 2:52 pm

Same here! First coat went on nicely, successive coats not so much.....

Still, the boat looks great Tim!
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: build status

Postby lohwaikin » Sat Jan 03, 2015 3:27 pm

Deliciously glossy.
For a moment I am seeing 2 chines per side....
Loh Wai Kin
Hull #437 "Big Bad Wolf"
Singapore.
lohwaikin
 
Posts: 137
Joined: Thu May 10, 2012 3:33 am

Re: build status

Postby Tim Ford » Sat Jan 03, 2015 6:32 pm

I could be wrong, and am often told by the family that I am, but I believe that is just a different color for below the waterline. Tim will tell us, I have faith.... 8-)

edit: BTW, the next person to post will own number 4500
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: build status

Postby Mist » Sat Jan 03, 2015 9:54 pm

Righto! The transition btwn white n blue is the waterline, I think. I say "I think" because the plans done show where the waterline is on this design. Obtaining a straight line down the side of the hull is quite a project too. I used a water level to shim the boat level fore and aft, and side to side (backache). Then I use a cheap laser level to project a level line on each side of the hull. I hope the line came out close to where it belongs. It's for show anyways. I'm keeping notes on how the paint job is going and will give more details when the job is finished. I know the photos make the boat look nice and shinny but it really is orange peelly. I know I can do so much better. I paid for college repairing cars in an auto body shop and I can't accept this current paint job. Thanks for the compliment and soon it will look even better.
Mist i550 #296 Tim K
Mist
 
Posts: 180
Joined: Fri Mar 25, 2011 9:41 pm
Location: Lower Chesapeake Bay, US

PreviousNext

Return to Building an i550

Who is online

Users browsing this forum: No registered users and 19 guests

cron