2014 AGM Board nominations

Talk about it.

Moderators: admin, Kevin

2014 AGM Board nominations

Postby Chad » Mon Jan 06, 2014 5:30 pm

Let's start this off with:
I'd like to nominate Jon Raymond for president.

(Nominations close on the 11th, so get em in soon!)
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: 2014 AGM Board nominations

Postby Tim Ford » Mon Jan 06, 2014 5:55 pm

I nominate Phil Ryder for Class Secretary

--TF
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: 2014 AGM Board nominations

Postby Chad » Mon Jan 06, 2014 6:10 pm

I'll second Phil for Secretary.

And for reference, here's the Constitution on elections:
8.3 Elections
8.3.1 Nominations for Class President, Chief Measurer, Secretary and Treasurer may be submitted by any full member. A Call for Nominations shall be made by the Class Secretary 60 days prior to the AGM.
8.3.2 Each full member may submit one nomination for each position. A minimum of two (2) nominations is required for inclusion on the ballot.
8.3.3 A nominee must be a full member at the time of nomination.
8.3.4 Nominations shall be submitted to the Secretary no later than 30 days prior to the AGM.
8.3.5 Election of class officers shall take place during the AGM according to section 9.1.2.1.
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: 2014 AGM Board nominations

Postby jray » Mon Jan 06, 2014 6:46 pm

I will nominate Chad McNeely for Chief Measurer.
Jon
#061 Critical Twist
jray
 
Posts: 531
Joined: Fri Mar 25, 2011 6:26 pm
Location: Polson, Montana

Re: 2014 AGM Board nominations

Postby jray » Tue Jan 07, 2014 2:56 pm

I nominate Tim Ketten for Class Treasurer.
Jon
#061 Critical Twist
jray
 
Posts: 531
Joined: Fri Mar 25, 2011 6:26 pm
Location: Polson, Montana

Re: 2014 AGM Board nominations

Postby Kevin » Tue Jan 07, 2014 7:26 pm

I second Jon Raymond for Class President.
Kevin McDaniel
i550 #074 - PipeDream
Kevin
 
Posts: 457
Joined: Fri Mar 25, 2011 7:11 pm
Location: Evanston, Il

Re: 2014 AGM Board nominations

Postby Chad » Fri Jan 10, 2014 10:12 pm

I'll add a "second" for Tim K for treasurer.

That leaves us with a full slate of nominated and seconded officers, except measurer. Hey, wait!

So, either second me, or get together with a pal and nominate some one else, today or tomorrow! Same goes for the other positions, if there's somebody you'd like to add to the list, get on it.
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: 2014 AGM Board nominations

Postby Tim Ford » Fri Jan 10, 2014 10:45 pm

i 2nd mister Chad McN for measurer.
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am


Return to General i550 Chatter

Who is online

Users browsing this forum: No registered users and 19 guests

cron